Panasonic KX-TG954 KX-TG9541B Owner's Manual (English) - Page 44
Silent mode, Call block, Handset / Base unit
![]() |
View all Panasonic KX-TG954 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Programming "Daily" An alarm sounds daily at the set time. Go to step 4. 3 Enter the desired month and date. a MOKN 4 Set the desired time. 5 *: Select "AM" or "PM". a MOKN 6 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. 7 MSELECTN a MOFFN Note: R To stop the alarm, press MOFFN or place the handset on the base unit or charger. R When the handset is in use, the alarm will not sound until the handset is in standby mode. 2 MbN: Select the desired setting. a MSAVEN R If you select "Off", press MEXITN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 MAM/PMN: Select "AM" or "PM". a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 MAM/PMN: Select "AM" or "PM". 7 MSAVEN a MEXITN Changing the start and end time Handset / Base unit 1 MMENUN#237 2 Continue from step 3 for handset or step 3 for base unit, "Turning silent mode on/off", page 44. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Important: R Make sure the unit's date and time setting is correct (page 16). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off Handset 1 MMENUN#238 2 MbN: Select the desired setting. a MSAVEN R If you select "Off", press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 *: Select "AM" or "PM". a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select "AM" or "PM". 7 MSAVEN a MOFFN Base unit 1 MMENUN#238 Call block This feature allows the unit to reject calls when: - the unit receives a call from a phone number stored in the call block list as unwanted ("Storing unwanted callers", page 44). - the unit receives a call without phone number ("Blocking incoming calls without phone number", page 45). When a call is received, the unit rings for a short time*1 while the caller is being identified. If the phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only) *1 This is called first ring. If you do not want the first ring to sound, turn this setting to "Off" (page 45). Important: R When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 47) with after the call is disconnected. R You can program this setting using either the base unit or one of the handsets. Storing unwanted callers You can store up to 250 phone numbers in the call block list. 44 For assistance, please visit http://www.panasonic.com/help TG954x(en)_0628_ver031.pdf 44 2013/06/28 12:35:32
![](/manual_guide/products/panasonic-kxtg9541b-kxtg9541b-owners-manual-english-e11b9f6/44.png)