Panasonic KX-TGA101S Expandable Digital Cordless Handset - Page 4
Registration, Belt clip - batteries
UPC - 037988477845
View all Panasonic KX-TGA101S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Panasonic battery performance Operation While in use (talking) While not in use (standby) Operating time Up to 17 hours Up to 7.5 days Note: L The handset can be left on the charger without any ill effect on the batteries. L The battery level may not be displayed correctly or the entire display may go blank after you replace the batteries. In this case, place the handset on the charger and let charge for 7 hours. Registration Register the handset to a KX-TG1032/ KX-TG1033/KX-TG1034/KX-TG1035 base unit. 1 Base unit: Press and hold {LOCATOR} until the registration tone sounds. L If all registered handsets start ringing, press {LOCATOR} to stop, then repeat this step. L After the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds. 2 Handset: Press {OK}, then wait until a beep sounds and w stops flashing. Changing the display language 1 {MENU} 2 {V}/{^}: "Handset settings" i {OK} 3 {V}/{^}: "Display settings" i {OK} 4 {V}/{^}: "Change language" i {OK} 5 {V}/{^}: Select the desired setting. 6 {OK} i {OFF} Belt clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip(A), pull the right edge in the direction of the arrow (B). A B 4 For assistance, please visit http://www.panasonic.com/help