Panasonic KX-TGA230W H/s For Kxtg2352w - Page 3

Registration! This cordless handset must be registered at the KX-TG2352W/KX-TG2382B base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute. CHARGE Indicator á HANDSET LOCATOR (ALL) •The illustration of the base unit is the KX-TG2352W. The handset display shows the instructions as shown on the right. 1 Base unit: Press HANDSET LOCATOR (ALL) until the CHARGE indicator flashes. 2 Handset: #Press á. $Wait until a long beep sounds and the display shows the registered number. The registration will be then complete. Press [ALL] on base for 3 sec, then press [H]. Handset Registering Ex. Extension number 3 Handset [3] Registered •The registered number "[1]" to "[3]" is shown on the top right of [3] the display. •You can stop registration by pressing (OFF) on the handset and pressing HANDSET LOCATOR (ALL) on the base unit. •After you register the handset to the base unit, please confirm that the other (first one and second one) pre-registered handsets display "Talk" by pressing . If one of the handsets does not display "Talk", re-register that handset to the base unit. To cancel the handset registration, please see the KX-TG2352W/KX-TG2382B Operating Instructions. For assistance, please call: 1-800-211-PANA(7262) - 3 -