Panasonic KX-TGA520 H/s For Tg52xx Serie - Page 3

Registration This cordless handset must be registered to a KX-TG5200/KX-TG5202/KX-TG5210/ KX-TG5212/KX-TG5213/KX-TG5230/KX-TG5240/KX-FPG391 base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time. Charge the battery fully. Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration. *LOCATOR Button 1[-] Press LOCATOR on base unit for 3 sec. Then press OKL BACK OK CHARGE Indicator To operate " OK ", press the right soft key. • Base unit model shown here is KX-TG5240. * The location of the LOCATOR button varies by base unit model. KX-TG5200/KX-TG5202: LOCATOR or [ ] KX-TG5210/KX-TG5212/KX-TG5213: LOCATOR/INTERCOM or [ ] KX-TG5230/KX-TG5240/KX-FPG391: [LOCATOR/INTERCOM/TRANSFER] The handset display shows the instructions as shown on the right. Press LOCATOR on base unit for 3 sec. Then press OKL BACK PLAY O K 1 Base unit: Press and hold the *LOCATOR button for 3 seconds. • The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. • On the KX-FPG391, "HS REGISTRATION" is displayed. 2 Handset: (1) Press the soft key ( OK ). IN USE SPIPRIVACY1[-] Handset Registering (2) Wait until a long beep sounds and the display shows the new extension number. • Registration is complete. Ex. Extension number 2 IN USE SPIPRIVACY1[2] Handset [2] Registered • The registered number "[1]" to "[4]" is shown on the top right of the display. • You can stop registration by pressing [OFF] on the handset and pressing the *LOCATOR button on the base unit. • If you try to register this handset to the KX-TG6500 base unit, "Wrong handset Refer to manual" is displayed. The base units for this handset are mentioned above. To cancel the handset registration, please see your base unit Operating Instructions. For assistance, please call: 1-800-211-PANA(7262) - 3 -