Panasonic KX-TGA950 Installation Manual CA - Page 3

Installation Battery installation/Battery charging When the language selection is displayed after installing the batteries for the first time, you can select your desired language. MbN: Select the desired setting. a MSAVEN a MOFFN Important: R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted in the base unit's operating instructions. R USE ONLY Ni-MH batteries AAA (R03) size (A). R Do NOT use Alkaline/Manganese/Ni-Cd batteries. R Confirm correct polarities ( , ). Charge for about 7 hours. R Confirm "Charging" is displayed (B). R When the batteries are fully charged, "Fully charged" is displayed. 1 2 Note: R If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. Registering a handset to a base unit 1 Base unit: Press and hold MLOCATORN for about 5 seconds. R Depending on the base unit, a registration tone sounds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 2 Handset: Place the handset on the base unit or charger, then wait until a long beep sounds and is displayed. 3 TGA950C(en)_0716_ver011.pdf 3 2013/07/16 12:26:14