Panasonic KX-TGE43 Operating Manual - Page 55
Answering system
View all Panasonic KX-TGE43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Useful Information Problem The 2nd caller's information is not displayed during an outside call. Cause/solution R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. The unit does not emit the specified number of rings. Cause/solution R The answering system is turned off. Turn it on (page 41). R The message memory is full. Erase unnecessary messages (page 42, 43). R The recording time is set to "Greeting only". Change the setting (page 46). R Your phone service provider's voicemail service may be answering your calls before the unit's answering system can answer your calls. Change the unit's number of rings setting (page 46) to a lower value, or contact your phone service provider. R The answering system will not answer incoming calls while the other devices such as handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 45). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 45). R The answering system is turned off. Turn it on (page 45). R If the first ring is turned off ("No") (page 24), the number of rings decreases by 1 from the specified number of rings. For assistance, please visit http://shop.panasonic.com/support 55 TGE43xUS(en)_1112_ver021.pdf 55 2015/11/12 10:12:58