Panasonic KX-TGE475S Quick Setup Guide - Page 4

TGE46x47x_QG(en).fm Page 4 Monday, November 16, 2015 5:01 PM Link to cell Pairing a Bluetooth cellular phone 1 Base unit: Press and hold {CELL 1} or {CELL 2} for about 5 seconds. L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. L Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: "0000"). L If your cellular phone prompts you to confirm the passkey, tap {OK} or otherwise to accept the pairing request. 3 Base unit: Wait until a long beep sounds. L It may take more than 10 seconds to complete pairing. L When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. Note: L Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phone's operating instructions. Base unit: CELL indicators Status Meaning On Flashing A cellular phone is connected. Ready to make/receive cellular calls. − The cellular line is in use. − Phonebook entries are being copied from a cellular phone. − The base unit is searching for the paired cellular phone. − The base unit is pairing a cellular phone. − A cellular call is put on hold. Flashing rapidly Light off A cellular call is being received. − A cellular phone is not paired to the base unit. − A cellular phone is not connected to the base unit. Handset: Link to cell display items td A cellular line is in use.*1 L When flashing: The cellular call is put on hold. L When flashing rapidly: A cellular call is being received. *1 Corresponding cellular lines (1, 2: cellular line) are indicated next to the item. xd A cellular phone is connected.*1 Ready to make/receive cellular calls. L When turned off: A cellular phone is not connected to the base unit. *1 Corresponding cellular lines (1, 2: cellular line) are indicated next to the item. uv − A cellular call is in progress on that line. − The cellular line is selected for the setting. - 4 -