Panasonic KX-TGF375S KX-TGF37x Owner's Manual - Page 75
Making/answering calls, intercom
View all Panasonic KX-TGF375S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Useful Information Problem I fully charged the batteries, but - still flashes, - is displayed, or - the operating time seems to be shorter. Cause/solution R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make local calls with the handset or base unit using a cellular line. I cannot make or answer cellular calls with the handset or base unit. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 53). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for landline is turned off. Adjust the ringer volume (page 22, 28, 44, 48). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 22, 28, 42, 47). R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 18. R Silent mode is turned on. Turn it off (page 50). R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 20). R Depending on the cellular phone's compatibility (page 6), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 19). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your system. For assistance, please visit www.panasonic.com/support 75 TGF37x(en)_1128_ver032.pdf 75 2014/11/28 16:08:43