Panasonic KX-TGP550T04 Quick Guide - Page 12

Controls Status Color Red Light pattern On Amber Flashing Flashing rapidly On Flashing Flashing rapidly Off - Meaning L When the base unit is turned on, the STATUS indicator lights in red for about 10 seconds. L The base unit is registering a handset. L The base unit is paging handsets. (KX-TGP500 only) L The base unit's IP address may conflict with the IP addresses of other devices on your local network. Contact your administrator for further information. L The base unit is obtaining an IP address or is obtaining configurations. Please wait. L The base unit is registering with your phone system. Please wait. L If the STATUS indicator continues flashing, check the following: - Network settings may not be correct. Contact your administrator. - Many installation issues can be resolved by resetting all the equipment. First, shut down your modem, router, hub, base unit, and computer. Then turn the devices back on one at a time in this order: modem, router, hub, base unit, computer. - If you cannot access Internet Web pages using your computer, check to see if your phone system is having connection issues in your area. - For more troubleshooting help, contact your administrator. L Unplug the base unit's AC adaptor to reset the unit, then reconnect the AC adaptor. If the STATUS indicator is still flashing rapidly, there may be a problem with the base unit hardware. Contact your phone system dealer. L The base unit power is off. L The Ethernet cable is not connected properly. Connect it. L Your network devices (hub, router, etc.) are turned off. Check the LEDs for the link status of the devices. L The base unit power is booting up. 12