Panasonic KX-TSC11 Its W/cid - Page 32

Call Restriction, ENTER PASSWORD, RESTRICT NO.:9, SAVED

Page 32 highlights

Special Features Call Restriction You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out except the emergency numbers stored in the Phone Book. To set the call restriction Make sure that the handset is on the cradle. 1 Press [FUNCTION/EXIT]. 2 Scroll to "CALL RESTRICT ?" by pressing [M] or [ ]. CALL RESTRICT ? 3 Press [ENTER]. RESTRICT NO.:-- If you changed the password "1111" (factory set), the display on the right will be shown. Follow below steps 1 and 2. 1. Enter the password (p. 31). 2. Press [ENTER]. Go to step 4. • If the wrong password was entered, "ERROR" will be displayed, then "- - - -" will be displayed. Enter the correct password. ENTER PASSWORD : 4 Enter the number(s) (1 digit or 2 digits) you want to restrict ([0] to [9]). • If the wrong number was entered, press [CLEAR] and enter the correct number. RESTRICT NO.:9- 5 Press [ENTER]. • The display will return to step 2. To exit the SAVED programming mode, press [FUNCTION/ EXIT] or wait for 60 seconds. • When dialing a phone number with the restricted leading digit(s), "CALL RESTRICTED" is displayed. • If the display shows "CALL RESTRICTED", you cannot store the emergency numbers in the Phone Book. To cancel the call restriction Follow steps 1 through 3. In step 4, press [CLEAR] to clear the restricted digits, and press [ENTER]. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Special Features
32
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out except the emergency numbers stored
in the Phone Book.
To set the call restriction
Make sure that the handset is on the cradle.
1
Press
[FUNCTION/EXIT]
.
2
Scroll to “
CALL RESTRICT ?
” by
pressing
[
]
or
[
]
.
3
Press
[ENTER]
.
4
Enter the number(s) (1 digit or 2
digits) you want to restrict (
[0]
to
[9]
).
• If the wrong number was entered, press
[CLEAR]
and enter the correct number.
5
Press
[ENTER]
.
• The display will return to step 2. To exit the
programming mode, press
[FUNCTION/
EXIT]
or wait for 60 seconds.
To cancel the call restriction
Follow steps 1 through 3. In step 4, press
[CLEAR]
to clear the restricted
digits, and press
[ENTER]
.
If you changed the password
1111
(factory set), the display on the right
will be shown. Follow below steps 1
and 2.
1. Enter the password (p. 31).
2. Press
[ENTER]
. Go to step 4.
• If the wrong password was entered,
ERROR
” will be displayed, then
“– – – –” will be displayed. Enter the
correct password.
• When dialing a phone number with the restricted leading digit(s), “
CALL
RESTRICTED
” is displayed.
• If the display shows “
CALL RESTRICTED
”, you cannot store the emergency
numbers in the Phone Book.
CALL RESTRICT ?
RESTRICT NO.:––
:
ENTER PASSWORD
RESTRICT NO.:9–
SAVED