Panasonic KXTG1062 Expand Digital Ans Sys - Multi Language - Page 41

Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Check tel line Error!! Failed Incomplete Memory full Messages full No link. Reconnect base AC adaptor. Requires subscription to Caller ID. Use rechargeable battery. Cause/solution L The called unit is in use. L Other units are in use and the system is busy. Try again later. L The handset you are using is too far from the base unit. Move closer and try again. L The handset's registration may have been canceled. Re- register the handset (page 27). L The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 8). L Recording was too short. Try again. L Phonebook copy failed (page 19). Confirm the other unit (the receiver) is in standby mode and try again. L Phonebook copy is incomplete. The receiver's phonebook memory is full. Erase the unnecessary phonebook entries (page 17) from the other unit (the receiver) and try again. L The phonebook memory is full. Erase unnecessary entries (page 17). L Message memory is full. Erase unnecessary messages (page 32, 33). L Message memory is full. Erase unnecessary messages (page 32, 33). L The handset has lost communication with the base unit. Move closer to the base unit and try again. L Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset's registration may have been canceled. Reregister the handset (page 27). L You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. L A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 5. For assistance, please visit http://www.panasonic.com/help 41