Panasonic KXTG2257PW 2.4 Ghz Cordles Phon - Page 79
Troubleshooting
View all Panasonic KXTG2257PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Troubleshooting Cordless Telephone Problem Remedy "No link to base Place on cradle and try again." is displayed and an alarm tone sounds. •You are too far from the base unit. Move closer and try again. •Place the handset on the base unit and try again. •Plug in the AC adaptor. •Raise the base unit antenna. Static, sound cuts in/out, fades. Interference from other electrical units. •Locate the handset and the base unit away from other electrical appliances (p. 3). •Move closer to the base unit. •Raise the base unit antenna. •Press Ü to select a clearer channel in the talk, speakerphone, intercom or remote operation mode. The handset and/or the base unit does not ring. •The ringer volume is set to OFF. Set to HIGH or LOW (p. 20). •When the handset is on the base unit, the handset does not ring. Only the base unit rings in the selected pattern when receiving a call. The handset display is blank. •Charge the battery fully (p. 14). You cannot store a name and phone number in the directory. •You cannot store an item in the directory while the unit is in the talk, speaker or intercom mode, while the answering system is in use or while storing phone numbers in the base unit. •Do not pause for over 60 seconds while storing. While programming or •To answer the call, press , or searching, the unit starts to (SP-PHONE). Start again from the ring and stops the program/ beginning after hanging up. search. You cannot make a call with •You cannot make a call when the unit is the handset. in the remote operation mode. Exit the mode by pressing (OFF) (p. 72). For assistance, please call: 1-800-211-PANA(7262) 79 Useful Information