Panasonic KXTG2322 KXTG2322 User Guide - Page 34

Troubleshooting Telephone System Problem Cause & Remedy An alarm tone sounds when you press [C], [SP-PHONE] or [VOICE ENHANCER]. • You are too far from the base unit. Walk closer to the base unit and try again. • Confirm the AC adaptor is plugged in. • Raise the base unit antenna. • If the above remedies do not solve the problem, the handset may have lost communication with the base unit. Register the handset again (p. 23) Static, sound cuts in/out, fades. Interference from other electrical units. • Move the handset and the base unit away from other electrical appliances (p. 3). • Walk closer to the base unit. • Raise the base unit antenna. The handset does not ring. • The ringer volume is turned off. Set to high, medium, or low (p. 14). You cannot program any functions. • Programming is not possible while the handset is being used. • Do not pause for over 60 seconds while programming. • Walk closer to the base unit. • While another user is listening to messages or the Answering System is handling a call, you cannot program. Try again later. While programming, the handset starts to ring and the program stops. • A call is coming in. To answer the call, press [C] or [SP-PHONE]. Start again from the beginning after hanging up. You cannot redial. • If the last number dialed was more than 48 digits long, the number will not be redialed correctly. You cannot make long distance calls. • Please make sure you have long distance service. You cannot page the handset. • The handset is too far from the base unit or is engaged in an outside call. Try again later. 34