Panasonic KXTG2383B 2.4 Ghz Cordles Phon - Page 63

Re-registering the Handset If you want to re-register the handset to the base unit or a different base unit of the same model, you need to register it to that base unit. The handset will be given a new extension number of that base unit. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute. If you have canceled the handset registration at the previous base unit (p. 62), start from step 5. 1 Handset: Press (MUTE/FUNCTION). 2 Scroll to "Initial set" by pressing Ö or Ñ, and press á. Date and time HInitial set 3 Scroll to "HS register" by pressing Ö or Ñ, and press á. 4 Press á at "Registration". Set answering HHS register HRegistration Deregistration 5 Base unit: Press and hold HANDSET LOCATOR/INTERCOM (ALL) until the CHARGE indicator flashes. Press [ALL] on base for 3 sec, then press [H]. 6 Handset: #Press á. Handset Registering $Wait until a long beep sounds and the display shows the registered number. The registration will be then complete. Ex. Extension number 3 Handset [3] •The registered number "[1]" to "[3]" is shown on Registered the top right of the display. •You can stop registration by pressing (OFF) on the handset and pressing HANDSET LOCATOR/INTERCOM (ALL) on the base unit. If you have not canceled the handset registration at the previous base unit (p. 62), the handset number still remains on that base unit memory. Erase the handset number from the previous base unit. For KX-TG2382B/KX-TG2382PW/ KX-TG2383B/KX-TG2383S base unit: (1) Press and hold HANDSET LOCATOR/INTERCOM (ALL) until the CHARGE indicator flashes. (2) Press and hold HANDSET LOCATOR/INTERCOM ((1) to (3)) of the handset number that you want to erase until the CHARGE indicator flashes, then rapidly flashes, then goes out. For assistance, please call: 1-800-211-PANA(7262) 63 Useful Information