Panasonic KXTG4023 KXTG4011 User Guide - Page 23

Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important: L See page 5 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset: {MENU} 2 {V}/{^}: "Initial setting" i {OK} 3 {V}/{^}: "Registration" i {OK} 4 {V}/{^}: "HS registration" i {OK} 5 Base unit: ■ KX-TG4011 series: page 3 Press and hold {LOCATOR} for about 5 seconds. (No registration tone) ■ KX-TG4021/KX-TG4071 series: page 3 Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. L If all registered handsets start ringing, press the same button to stop. Then repeat this step. L The next step must be completed within 90 seconds. Programming 6 Handset: Press {OK}, then wait until a long beep sounds. Note: L While registering, "Base in registering mode" is displayed on all registered handsets. L When you purchase an additional handset, refer to the additional handset's installation manual for registration. Deregistering a handset A handset can cancel its own registration (or the registration of another handset) that is stored to the base unit. This allows the handset to end its wireless connection with the system. 1 {MENU} 2 {V}/{^}: "Initial setting" i {OK} 3 {V}/{^}: "Registration" i {OK} 4 {V}/{^}: "Deregistration" i {OK} 5 {3}{3}{5} i {OK} 6 Select the handset(s) you want to cancel by pressing the desired handset number ({1}-{6}). i {OK} L The selected handset number(s) flashes. L To undo a selection, press the handset number again. The number stops flashing. 7 {V}/{^}: "Yes" i {OK} 8 {OFF} For assistance, please visit http://www.panasonic.com/help 23