Panasonic KXTG5230M KXTG5230 User Guide - Page 66
Initial setting, Registration, HS registration, Handset [2], Registered
View all Panasonic KXTG5230M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Canceling Registration/Re-registration Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration. If you have canceled handset registration at a previous base unit (p. 65), start from step 5. 1 Handset: Press [MENU]. 2 Handset: Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting 3 Handset: Scroll to "Registration" by pressing [d] or [B], then press the soft key ( SELECT ). Registration 4 Handset: Press the soft key ( SELECT ) at "HS registration". HS registration 5 Base unit: Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds. • The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 6 Handset: (1) Press the soft key ( O K ). (2) Wait until a long beep sounds and the display shows the new extension number (ex. extension number 2). • Registration is complete. Press LOCATOR on base unit for 3 sec. Then press OK BOX 1 BOX 2 O K IN USE SPIPRIVACY1[2] Handset [2] Registered • You can stop registration by pressing [OFF] on the handset and pressing [LOCATOR/INTERCOM/TRANSFER] on the base unit. • If "Wrong handset Refer to manual" is displayed, the handset you tried to register is not for this base unit. This handset is for KX-TG6500 base unit. The accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order, see page 3. If you have not canceled the handset's registration at the previous base unit (p. 65), the handset number remains in that base unit's memory. To erase the handset number from the previous base unit, see the base unit's Operating Instructions. For the KX-TG5230 base unit: (1) Press and hold [LOCATOR/ INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset number [1] ( ) to [4] ( ) that you do not want for 5 seconds. A long beep sounds, then the handset number is erased. 66