Panasonic KXTG5422 5.8g Nxpd Tot 1 Hs - Page 48
TROUBLESHOOTING, General use, Programmable settings
View all Panasonic KXTG5422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Useful Information Troubleshooting General use Problem The unit does not work. The display shows "No link to base. Move closer to base, try again." and an alarm tone sounds. I cannot hear a dial tone. Cause & solution L Make sure that the battery is installed correctly (page 10). L Check the connections (page 9). L Fully charge the battery (page 11). L Clean the charge contacts and charge again (page 11). L Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. L Re-install the battery (page 10) and fully charge it. L The handset is too far from the base unit. Move closer and try again. L Plug in the base unit's AC adaptor. L Raise the base unit antennas. L If the above remedies do not solve the problem, the handset may have lost communication with the base unit. Register the handset again (page 40). L Confirm that the telephone line cord is connected (page 9). L Disconnect the unit from the telephone line and connect a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your telephone company. Programmable settings Problem I cannot program items. While programming, the handset starts to ring. Cause & solution L Programming is not possible while the handset is being used. L Do not pause for over 1 minute while programming. L Move closer to the base unit. L A call is being received. Answer the call and start again from the beginning after hanging up. 48 For assistance, please call 1-800-211-PANA (7262).