Panasonic KXTG5452 KXTG5451 User Guide - Page 33
Handset locator, From the base unit to a handset
View all Panasonic KXTG5452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Intercom Features For KX-TG5453 users Call the desired unit by selecting the extension number, shown in the upper right of each handset's display. The base unit's extension number is 0. L To confirm the handset's extension number ([1], [2], or [3]), place the handset on the base unit or charger. L The base unit will display the paging or paged handset number (H1, H2, or H3). From the handset to the base unit 1 Handset: Press {INTERCOM}, then press {0}. L You can also select the base unit by pressing {V} or {^} then pressing {>}. L The base unit will ring for 1 minute. L To stop paging, press {OFF}. 2 Base unit: Press {CALL} to answer the page. 3 Handset: When finished talking, press {OFF} or place the handset on the charger. Note: L During an intercom call, the handset user can switch to the speaker by pressing {s}. To switch back to the receiver, press {C}. L To adjust the base unit's speaker volume, press {>} or {