Panasonic KXTGA546S 5.8g 1.4colorlcd 1hs - Page 61

Useful Information Phonebook Problem I cannot store an item in the phonebook. While storing an item in the phonebook, the handset starts to ring. The display exits the phonebook while searching. Cause & solution L You cannot store an item in the phonebook while the handset is in talk, speakerphone or intercom mode, or while listening to messages. L Do not pause for over 1 minute while storing. L A call is being received. Answer the call and start again from the beginning after hanging up. L The handset automatically exits after 1 minute of inactivity. Caller ID Problem The handset does not display the caller's name and/or phone number. The handset or base unit does not announce the displayed caller names. Cause & solution L You have not subscribed to Caller ID service. Contact your telephone company to subscribe. L If your unit is connected to any additional telephone equipment such as a Caller ID box or wireless telephone jack, disconnect the unit from the equipment and plug the unit directly into the wall jack. L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The name display service may not be available in some areas. Contact your telephone company for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. L The caller requested not to send caller information (page 26). L Generally caller information is displayed from the 2nd ring. L The handset or base unit's ringer volume is turned off. Adjust it (page 36, 42). L The Talking Caller ID feature is turned off. Turn it on (page 40, 43). L Caller names will usually be announced after the 2nd ring. L The ring count for the answering system is set to "2" or "Toll saver". Select a different setting (page 52). For assistance, please visit http://www.panasonic.com/consumersupport 61