Panasonic KXTGP500 KXTGP500 User Guide - Page 30
Do not disturb, Block anonymous calls, Call block (Caller ID service users only)
View all Panasonic KXTGP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Y Programming using the Handset Do not disturb This feature allows the unit to reject calls on selected lines. The default setting is "Off". Important: L We recommend setting with your administrator. Contact your administrator for further information. L If this feature is set on your unit, it may be overridden by your phone system settings. L This feature is not available on shared lines. L The call is logged in the caller list (page 42) with Q after the call is rejected. 1 {MENU} (center of joystick) 2 {V}/{^}: "IP service" i {SELECT} 3 {V}/{^}: "Call features" i {SELECT} 4 {V}/{^}: "Do not disturb" i {SELECT} 5 Proceed with the desired operation. ■ When 1 line is registered: Go to step 6. ■ When 2 or more lines are registered: {V}/{^}: Select the desired line. i {SELECT} 6 {V}/{^}: Select "On" or "Off". i {SAVE} i {OFF} Block anonymous calls This feature allows the unit to reject calls when the unit receives a call without phone number. The default setting is "Off". Important: L We recommend setting with your administrator. Contact your administrator for further information. L This feature is not available on shared lines. L The call is logged in the caller list (page 42) with Q after the call is rejected. 1 {MENU} (center of joystick) 2 {V}/{^}: "IP service" i {SELECT} 3 {V}/{^}: "Call features" i {SELECT} 4 {V}/{^}: "Block anonymous" i {SELECT} 5 Proceed with the desired operation. 30 ■ When 1 line is registered: Go to step 6. ■ When 2 or more lines are registered: {V}/{^}: Select the desired line. i {SELECT} 6 {V}/{^}: Select "On" or "Off". i {SAVE} i {OFF} Call block (Caller ID service users only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call block list, the unit rejects the call. Important: L When the unit receives a call from a number that is stored in the call block list, the call is logged in the caller list (page 42) with $ after the call is rejected. Storing unwanted callers You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly. Important: L You are advised to store the 10 digits (including an area code) for PSTN calls because if 7 digits are stored, all numbers that have the last 7 digits will be blocked. From the caller list: 1 {CID} (left soft key) 2 {V}/{^}: Select the entry to be blocked. i {MENU} 3 {V}/{^}: "Save call block" i {SELECT} 4 {V}/{^}: "Yes" i {SELECT} i {OFF} By entering phone numbers: 1 {MENU} (center of joystick) i {#}{2}{1}{7} i {ADD} 2 Enter the phone number (24 digits max.). i {SAVE} L To erase a digit, press {CLEAR}.