Panasonic LUMIX S Operating Manual - Page 20
Supplied Accessories
View all Panasonic LUMIX S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
- When attaching or removing the lens, be careful so that foreign objects such as sand, dust, and water droplets do not adhere to or enter the lens mount rubber, contact points, digital camera and lens. - If the lens is exposed to water droplets or other liquids, wipe them off with a soft, dry cloth. 0 To improve the dust and splash resistant performance of the lens, a lens mount rubber is used in the mount. - The lens mount rubber will leave scuff marks on the digital camera mount, but this does not impact performance. - For information on changing the lens mount rubber, contact your nearest Service Center. ∫ Condensation (when the lens is fogged up) 0 Condensation occurs when the ambient temperature or humidity changes. Please be careful, as it may cause lens stains, mold and malfunction. 0 If condensation occurs, turn off the digital camera and leave it for approx. 2 hours. The fog will disappear naturally when the temperature of the digital camera becomes close to the ambient temperature. 0 The appearance and specifications of products described in this document may differ from the actual products you have purchased due to later enhancements. Supplied Accessories Product numbers correct as of January 2019. These may be subject to change. 1 2 3 4 SFC0360 1ZE4SR24105Z 1GE1Z276Z RGE1Z276Z 1 Lens pouch 2 Lens hood 3 Lens cap¢ 4 Lens rear cap¢ ¢ Fitted to the lens at the time of purchase. 20 DVQX1714