Panasonic MC-CG983 MC-CG983 Owner's Manual (English) - Page 44
Removing Belt, Turn POWER NOZZLE over.
View all Panasonic MC-CG983 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removing Belt ➢ Disconnect vacuum cleaner from electrical outlet. ➢ Check and remove hair, string and lint build-up frequently in the POWER NOZZLE brush and brush support areas. ➢ If build-up becomes excessive, disconnect POWER NOZZLE from wand and follow the steps below. ➢ Turn POWER NOZZLE over. ➢ Unscrew the two (2) POWER NOZZLE cover screws. ➢ Turn POWER NOZZLE right side up. ➢ Press handle release pedal and lower the swivel. Tabs Languettes Pestaña ➢ To remove cover, grasp the sides and pull out. ➢ Tilt cover forward from back until front snaps free. ➢ Depress tabs on rear of agitator cover and rotate forward to release from the POWER NOZZLE base. Agitator Cover Couvercle de l'agitateur Cubierta del agitador ➢ Lift agitator assembly out . ➢ Remove worn belt. Agitator Support Support de l'agitateur Soportes del agitador Base Base Base Agitator Assembly Belt Pulley End Cap End Cap Brush Unit - 44 -