Panasonic MC-GG213 MC-GG213 Owner's Manual (English) - Page 26

Removing and Installing Lower Plate, Electrical Shock or Personal Injury Hazard

Page 26 highlights

WARNING Electrical Shock or Personal Injury Hazard Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. Removing and Installing Lower Plate Latches Loquets Lengüetas ➢ Before servicing any parts, disconnect vacuum cleaner from electrical outlet. ➢ Place paper under nozzle anytime lower plate is removed to protect floor. ➢ Place handle in down position and turn vacuum cleaner over to expose lower plate. Lower Plate Plaque inférieure Base inferior ➢ Release lower plate by presing two (2) latches inward. ➢ Remove lower plate and remove any residue that may exist in belt area. ➢ Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing. ➢ Make sure all wires are routed properly and not pinched. ➢ Press lower plate into place then replace three (3) screws. - 26 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

- 26 -
WARNING
Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Removing and Installing Lower Plate
Before servicing any p
art
s,
disconnect vacuum cleaner from
electrical outlet
.
Place paper under nozzle anytime
lower plate is removed to protect
floor.
Place handle in down position and
turn vacuum cleaner over to expose
lower plate.
Release lower plate by presing two
(2) latches inward.
Remove lower plate and remove any
residue that may exist in belt area.
Reinstall lower plate by hooking
front end of lower plate into slots on
front of nozzle housing.
Make sure all wires are routed
properly and not pinched.
Press lower plate into place then
replace three (3) screws.
Latches
Loquets
Lengüetas
Lower Plate
Plaque inférieure
Base inferior