Panasonic MC-UG327 MC-UG327 Owner's Manual (Multi Language) - Page 48
position standing on the handle., This will minimize wheel
View all Panasonic MC-UG327 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2 1 Four Screws Quatre vis Cuatro Tornillos ➢ Place the vacuum in the upright position standing on the handle. This will minimize wheel interference when installing nozzle bottom plate. ➢ Reinstall nozzle cover by (1) aligning front edge of the cover with the nozzle and (2) rotating to installed position. ➢ Lay unit on floor bottom up with nozzle flat. ➢ Install the four screws to the nozzle cover. ➢ Route nozzle hose to hose holder. Align nozzle hose bracket with retaining bracket on body and slide down unit it clicks into place. ➢ Return the vacuum cleaner to the upright position before plugging into an electrical outlet. - 48 -
- 48 -
Four Screws
Quatre vis
Cuatro Tornillos
➢
Lay unit on floor bottom up with
nozzle flat.
➢
Install the four screws to the nozzle
cover.
➢
Route nozzle hose to hose holder.
Align nozzle hose bracket with
retaining bracket on body and slide
down unit it clicks into place.
➢
Return the vacuum cleaner to the
upright position before plugging
into an electrical outlet.
2
1
➢
Place the vacuum in the upright
position standing on the handle.
This will minimize wheel
interference when installing nozzle
bottom plate.
➢
Reinstall nozzle cover by (1)
aligning front edge of the cover with
the nozzle and (2) rotating to
installed position.