Panasonic MCUG581 MCUG581 User Guide - Page 26

WARNING Electrical Shock or Personal Injury Hazard Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. Removing and Installing Lower Plate Three Screws Trois vis Tres tornillos ➢ Before servicing any parts, disconnect vacuum cleaner from electrical outlet. ➢ Place paper under nozzle anytime lower plate is removed to protect floor. Lower Plate Plaque inférieure Base inferior ➢ Place handle in down position and turn vacuum cleaner over to expose lower plate. ➢ Release lower plate by removing three (3) screws. ➢ Remove lower plate and remove any residue that may exist in belt area. ➢ Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing. ➢ Make sure all wires are routed properly and not pinched. ➢ Press lower plate into place then replace three (3) screws. - 26 -