Panasonic MCUG585 MCUG585 User Guide - Page 28

Replacing Headlight Bulb ➢ Remove lower plate. ➢ Remove bulb socket screw, grasp the + bulb socket assembly and pull upward while moving it back and forth. ➢ Remove old bulb from the bulb socket assembly by pushing in while turning counter-clockwise. Bulb Socket Assembly Assemblage de la lampe Casquillo portalámparas ➢ Replace bulb by pushing in while turning clockwise. ➢ Only use a bulb rated 130 V AC-15 Watts or less. ➢ Reinstall bulb socket assembly into nozzle housing by pushing it back down into slot and reinstall bulb socket screw. ➢ Reinstall lower plate. Replacing Belt + + + Felt Packing Cale en feutre Empaquetadura de fieltro Lift Agitator Up Soulever l'agitateur Unidad del agitador + ➢ Replace belt whenever a burning rubber smell caused by excessive slippage occurs. ➢ Remove lower plate. ➢ Lift rear belt cover and remove felt packing. ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. Motor Shaft Arbre d'entraînement du moteur Eje del motor Install New Belt Poser la nouvelle courroie Instalación de la correa ➢ Clean agitator. ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. - 28 -