Panasonic MCV225 MCV225 User Guide - Page 36

REMOVING CLOGS, cleaner OFF and UNPLUG PO

Get Panasonic MCV225 - COMMERCIAL VACUUM PDF manuals and user guides View all Panasonic MCV225 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Removing Clogs Hose Tuyau Manguera Cover (Suction Inlet) Couvercle (entrée d'aspiration) Cubierta (Abertura de aspiración) Short Hose Tuyau court Manguera corta The hose located on the back of the vacuum cleaner carries the dirt from the nozzle up to the dust bag. If the hose should become clogged: ➢ Unplug vacuum. ➢ Pull open suction inlet cover and check for clogging. ➢ Disconnect wand from short hose and check wand and hose. ➢ Plug in vacuum cleaner and turn on. ➢ Disconnect wand and stretch hose in and out to remove clog. Short Hose Tuyau court Manguera corta ➢ If clog still exists, turn vacuum cleaner OFF and UNPLUG POWER CORD. ➢ Remove lower plate. ➢ Remove short hose from nozzle by lifting straight up. ➢ Inspect hose end and clear any obstructions. ➢ Reinstall short hose and lower plate. - 36 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
- 36 -
Short Hose
Tuyau court
Manguera
corta
Removing Clogs
Hose
Tuyau
Manguera
Cover
(Suction Inlet)
Couvercle
(entr
é
e
d
’
aspiration)
Cubierta
(Abertura de
aspiraci
ó
n)
Short Hose
Tuyau court
Manguera
corta
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag.
If the hose
should become clogged:
➢
Unplug vacuum.
➢
Pull open suction inlet cover and
check for clogging.
➢
Disconnect wand from short hose
and check wand and hose.
➢
Plug in vacuum cleaner and turn on.
➢
Disconnect wand and stretch hose in
and out to remove clog.
➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG PO
WER
CORD
.
➢
Remove lower plate.
➢
Remove short hose from nozzle by
lifting straight up.
➢
Inspect hose end and clear any
obstructions.
➢
Reinstall short hose and lower plate.