Panasonic MCV5203 MCV5203 User Guide - Page 30

+ + + Replacing Belt ➢ Replace belt whenever a burning rubber smell caused by excessive slippage occurs. Lift Agitator Up Unidad del agitador Soulever l'agitateur Motor Shaft Arbre d'entraînement du moteur Eje del motor + + + ➢ Remove lower plate. ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. ➢ Clean agitator. ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. ➢ Reinstall agitator back into nozzle housing grooves. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. ➢ Reinstall lower plate. Groove Ranura Ouverture End Cap Tapa del extremo Bouchon - 30 -