Panasonic MCV5267 MCV5267 User Guide - Page 32

Replacing Belt + ➢ Replace belt whenever a burning rubber smell caused by excessive + slippage occurs. Felt Packing Empaquetadura de fieltro Cale en feutre Lift Agitator Up Unidad del agitador Soulever l'agitateur + Motor Shaft Eje del motor Arbre d'entraînement du moteur Install New Belt Instalación de la correa Poser la nouvelle courroie + + + ➢ Remove lower plate. ➢ Lift rear belt cover and remove felt packing. ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. ➢ Clean agitator. ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. ➢ Reinstall agitator back into nozzle housing grooves. ➢ Close rear belt cover and reinstall felt packing. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. Groove Ranura Rainure End Cap Tapa del extremo Bouchon ➢ Reinstall lower plate. Cleaning Agitator ➢ Clean agitator after every five uses and every time the belt is replaced. ➢ Remove lower plate. ➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors. ➢ Remove agitator. ➢ Remove any string or debris located on the end caps, washers or agitator shaft. ➢ Reinstall agitator and lower plate. - 32 -