Panasonic NC-HU401P NCHU301 User Guide - Page 17

Connect the power plug after filling with water and close the lid. (1 → 2) Notifies when boiled. Fall in temperature Starts boiling automatically. beep beep beep beep ( ) Automatically switches to 190 keep-warm Light on Light off How to Use Charging battery indicator (for cordless dispensing) Light on Water temperature indicator When changing the setting of keep warm temperature (☞ P. 19) When adjusting the temperature suitable for tea (☞P. 19) Press Light on Press Press to Pour Dispensing speed of hot water varies depending on degree of pressing and dispensing time. Automatically locked in 10 seconds after dispensing is finished. Dispensing period (Amount of time to press continuously) Less than 5 seconds From 5 to 12 seconds More than 12 seconds Press slightly Charging battery indicator. (for cordless dispensing) Press strongly * Be careful of hot water splashing if pressed too strongly Guideline for dispensing volume Battery charge volume Dispensing volume With cordless dispensing, and before the water boils, there are only two speeds Approx. 3L or more (4.0L type) Almost full volume (3.0L types) w 1 1.5L or less *1 Full water volume may not be indicated if dispensed frequently . ● Indication lights off and cannot dispense hot water after 8-10 hours even if not dispensed. Water temperature falls about 194°F(90°C) in 3 hours after boiling. (3.0L type) at room temperature 68°F(20°C) * Temperature falls quicker if water volume is less. When the unit is not in use Unplug, and remove the lid. Pour out any remaining hot water slowly via the mark. Cautions Lid release part Operation panel ● Do not pour out water too quickly. If water is splashed over lid release section or operation panel, it may cause a malfunction. ● Do not leave water standing in the container. It may cause the container to corrode or smell. 17