Panasonic NE17521 NE12521 User Guide - Page 14

How to Operate D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (See pages 14-15) Example: To program 1.5 times of heating time for double quantity into Number/Memory pads "1" and "5" at A side PAD INSTRUCTION 1 Open the door and leave it open.  The oven lamp will turn on, and "0" will appear. DIGITAL DISPLAY WINDOW 2 Press Prog pad.  "PROG" will start to blink. 3 Press Shift (A/B/C) pad, Number/Memory pads "1" and "5".  The selected pad number will appear and currently programmed information will be indicated. 4 Press Double Quantity pad.  The currently programmed magnification number will appear. Note: 1.6 times is preset at factory. 5 Press Number/Memory pads "1" and "5" for 1.5 times.  The programmed magnification number will appear. If A15 is programmed for 3 minutes, the time for the double quantity will be 4 minutes and 30 seconds. Available range is 0.1-3.0 times. 6 Press Prog pad.  "PROG" will stop blinking. This means that you have completed programming. s SECONDSLATER hvWILLAPPEAR Note: If you want to program your desired magnification number for triple quantity, repeat as above, using Triple Quantity pad instead of Double Quantity pad. All models except Model No. NE-1772 also display the memory number in steps 4, 5, and 6. E. PROGRAM LOCK 4O!CTIVATE0ROGRAM,OCK PAD INSTRUCTION 1 Open the door and leave it open.  The oven lamp will turn on, and "0" will appear. DIGITAL DISPLAY WINDOW 2 While pressing Start pad, press Prog pad until "PROG", "P" and "L" appear. (more than 2 seconds)  "PROG", "P" and "L" will appear. 3 seconds later, "0" will appear. In Program Lock mode: s 4HEOVENISSTARTEDBYPRESSINGTHEDESIRED.UMBER-EMORYPAD4HEREISNONEEDTOPRESS3TARTPAD s 4HEOVENCANNOTBEPROGRAMMEDORRUNMANUALLYUNTILTHEPROGRAMLOCKISRELEASED - 14 -