Panasonic NN-SD382 Operating Instructions - Page 28

IP4928_3BA63CP_00_140417 2014-4-17 10:46 Page 26 Before Requesting Service (continued) PROBLEM Oven will not turn on. Oven will not start cooking. The Glass Tray wobbles. When the oven is operating, there is noise coming from the glass tray. appears in display Window. The oven stops cooking by microwave and "h00", "h97" or "h98" appears in the display window. POSSIBLE CAUSE REMEdy The oven is not plugged in Remove plug from outlet, wait securely. 10 seconds and re-insert. Circuit breaker or fuse is Reset circuit breaker or replace tripped or blown. fuse. There is a problem with the Plug another appliance into the outlet. outlet to check if it is working. The door is not closed completely. Close the oven door securely. Start Button was not pressed Press Start Button. after programming. Another program is already Press Stop/Reset Button to cancel entered into the oven. the previous program and enter new program. The program is not correct. Program again according to the Operating Instructions. Stop/Reset Button has been Program oven again. pressed accidentally. The Glass Tray is not positioned properly on the Roller Ring or there is food under the Roller Ring. Take out Glass Tray and Roller Ring. Wipe with a damp cloth and reset Roller Ring and Glass Tray properly. The Roller Ring and oven bottom are dirty. Clean these parts according to Care and Cleaning of your Microwave Oven (see page 10). The CHILD LOCK was activated by pressing Start button 3 times. Deactivate LOCK by pressing Stop/Reset button 3 times. This display indicates a Please contact an authorized problem with the microwave Service Centre (see page 27). generation system. 26