Panasonic NN-SD763 Operating Instructions - Page 30
Before Requesting Service
View all Panasonic NN-SD763 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Before Requesting Service These things are normal: The oven causes interference with my TV. Some radio and TV interference might occur when you cook with the microwave oven. This interference is similar to the interference caused by small appliances such as mixers, vacuums, blow dryers, etc. It does not indicate a problem with your oven. Steam accumulates on the oven door and warm air comes from the oven vents. During cooking, steam and warm air are given off from the food. Most of the steam and warm air are removed from the oven by the air which circulates in the oven cavity. However, some steam will condense on cooler surfaces such as the oven door. This is normal. After use, the oven should be wiped dry (see page 10). PROBLEM Oven will not turn on. Oven will not start cooking. The Glass Tray wobbles. When the oven is operating, there is noise coming from the glass tray. The word "LOCK" appears in the Display Window. The oven stops cooking and "SERVICE" appears in the display window. POSSIBLE CAUSE REMEDY The oven is not plugged in securely. Main circuit breaker or main fuse is tripped or blown. There is a problem with the outlet. Remove plug from outlet, wait 10 seconds and re-insert. Reset main circuit breaker or replace main fuse. Plug another appliance into the outlet to check if it is working. The door is not closed completely. Start Button was not pressed after programming. Another program is already entered into the oven. The program is not correct. Stop/Reset Button has been pressed accidentally. Close the oven door securely. Press Start Button. Press Stop/Reset Button to cancel the previous program and enter new program. Program again according to the Operating Instructions. Program oven again. The Glass Tray is not positioned properly on the Roller Ring or there is food under the Roller Ring. Take out Glass Tray and Roller Ring. Wipe with a damp cloth and reset Roller Ring and Glass Tray properly. The Roller Ring and oven bottom are dirty. Clean these parts according to Care and Cleaning of your Microwave oven (see page 10). The CHILD LOCK was activated. Deactivate LOCK by pressing Stop/Reset Button 3 times. This displaying indicates a problem with the microwave generation system. Please contact an authorised Service Center (see page 29). 28 1"@'#,$1@&OH@11@JOEE