Panasonic NN-SD972 Operating Instructions - Page 21

timer feature This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start. caution: if oven lamp is lit while using the timer feature, the oven is incorrectly programed. stop oven immediately and re-read instructions. to use as a Kitchen timer: example: to count down 5 minutes. 1. • Press timer/clock. to set delay start: example: to delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes. 1. • Press timer/clock. 2. • Set time, using Time Select Dial to 5 minutes. 3. • Press start. Time will count down without oven operating. to set stand time: example: to cook at P6 power for 3 minutes, with stand time of 5 minutes. 1. • Enter the desired Power level (see page 11 for directions). Press 5 times 2. • Set cooking time, using Time Select Dial to 3 minutes. 2. • Set delay time, using Time Select Dial To 5 minutes. 3. • Enter the desired Power level (see page 11 for directions). Press 5 times 4. • Set cooking time, using Time Select Dial. 5. • Press start. Delay time will count down. Then cooking will start. note: 3. • Press timer/clock. 1. When each stage finishes, a two-beep signal sounds. At the end of the pro- gram, the oven will beep five times. 2. If the oven door is opened during Stand Time, Kitchen Timer or Delay 4. • Set stand time, using Time, the time on the display will con- Time Select Dial. tinue to count down. 3. Stand time and Delay start cannot be programmed before any automatic Function. This is to prevent the starting temperature of food from rising before 5. • Press start. defrosting or cooking begins. A change  Cooking will start. in starting temperature could cause After cooking, stand inaccurate results. time will count down 4. The maximum programmable time of without oven operating. Standing Time, Kitchen Time or Delay Time is up to 90 minutes. 19