Panasonic NNP294BF NNP294 User Guide - Page 28
Cleaning Grease Filters, Cooktop/night Light Replacement, Oven Light Replacement
![]() |
UPC - 037988907861
View all Panasonic NNP294BF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Care and Cleaning of Your Microwave Oven (continued) Cleaning Grease Filters The Grease Filters should be removed and cleaned often, at least once a month. 1. Grasp the "metal ring" on the Grease Filter. Slide the Grease Filter to the rear of oven. Grasp the ring 2. Pull the Grease Filter out. 3. Use care when cleaning the Grease Filters. Corrosive clean- ing agents, such as lye-based oven cleaners, may damage the Grease Filters. Clean the Grease Filters with a warm detergent solution. Do not use ammonia or other alkali because it will darken metal. Light brushing can be used to remove embedded dirt. Shake and remove moisture before replacing. Installing Grease Filters 1. Slide in the edge of the Grease Filters along the opening's guide edges. 2. Push up front edge and pull forward until it fits. Oven Light Replacement Be careful as the Oven Light Cover and the bulb may be hot. 1. Unplug microwave oven or disconnect power. 2. Remove the Vent Grille (and Charcoal Filter). (see "Cleaning Vent Grille/Charcoal Filter attachment/replacement on page 25). 3. Lift the tab of Oven Light Cover, and push back. Lift up and remove the cover. 4. Replace the old bulb with a new one. (use 115-125 V, 30 W bulb) If this bulb is not available locally, contact your local Panasonic dealer. Part number is F60305H00AP. 5. Reinstall the Oven Light cover securely aligning the hole in cover, onto the detent. opening guide Grease Filter Caution: After removing the Grease Filter, be careful with the sharp edges at the openings. Never operate the Vent Fan without the Grease Filters in place. Cooktop/Night Light Replacement Be careful as the Cooktop Light Cover and the bulb may be hot. 1. Unplug microwave oven or disconnect power. 2. Loosen the screw to open the Cooktop Light Cover. (Be careful not to lose the screw.) 3. Replace the old bulb with a new one. screw Oven Light Cover hole detent When cleaning the Oven Light Cover or the adjacent area, clean with a soft damp cloth. To avoid scratches, do not use harsh detergents or abrasives. Cooktop Light Cover (use 115-125 V, 30 W bulb) If this bulb is not available locally, contact your local Panasonic dealer. Part number is F60305H00AP. 4. Reinstall the Cooktop Light Cover. 26
![](/manual_guide/products/panasonic-nnp294-nnp294-user-guide-d490d75/28.png)