Panasonic PT-D5000ES Brochure - Page 4
Specifications, Optional accessories, Projection distance, NOTES ON USE, Multiple terminals, - pt d5000e projector
View all Panasonic PT-D5000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Specifications Power supply 220-240 V AC 50/60 Hz Power consumption 600 W (670 VA) (Eco standby mode*1: 0.3 W, Standby mode normal: 9 W. Both with fan stopped.) DLP™ chip Panel size 0.7˝ diagonal (4:3 aspect ratio) Display method DLP™ chip x 1, DLP™ system Pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels Lens PT-D5000ES Powered zoom/focus lenses (1.8-2.4:1), F 1.7-2.0, f 25.6-33.8 mm PT-D5000ELS Optional powered zoom/focus lenses Lamp 240 W UHM lamps (x 2) (dual-lamp system) Screen size 50-600 inches (50-200 inches with the ET-DLE055), 4:3 aspect ratio Brightness*2 5,000 lumens (dual-lamp) Centre-to-corner uniformity*2 90 % Contrast*2 1,000:1 (full on/full off) Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) Scanning DVI-D frequency RGB Horizontal: 15-91 kHz, Vertical: 50-85 Hz, Dot clock: 162 MHz or lower Horizontal: 15-91 kHz, Vertical: 50-85 Hz, Dot clock: 150 MHz or lower YPBPR (YCBCR) 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60p, 1080/50p S-Video/Video Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM) Optical axis shift Vertical: +50 % (powered), horizontal: ±10 % (powered) Keystone correction range Vertical: ±40° (±30° with the ET-DLE055) Installation Ceiling/floor, front/rear Terminals*3 DVI-D IN DVI-D 24-pin RGB 1/YPBPR IN BNC x 5 RGB 2/YPBPR IN D-sub HD 15-pin VIDEO IN BNC S-VIDEO IN Mini DIN 4-pin SERIAL IN D-sub 9-pin (RS-232C compliant) SERIAL OUT D-sub 9-pin REMOTE 1 IN M3 jack REMOTE 1 OUT M3 jack REMOTE 2 IN D-sub 9-pin LAN RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ Power cord length 3.0 m (9´10˝ ) Cabinet material Molded plastic Dimensions PT-D5000ES 498 mm x 175 mm*4 x 440 mm*5 (19-19/32˝ x 6-7/8˝ *4 x 17-5/16˝ *5) (with supplied lens) (W x H x D) PT-D5000ELS 498 mm x 175 mm*4 x 432 mm (19-19/32˝ x 6-7/8˝ *4 x 17˝) (without lens) Weight*6 PT-D5000ES Approx. 16.0 kg (35.3 lbs) (with supplied lens) PT-D5000ELS Approx. 15.2 kg (33.5 lbs) (without lens) Operating temperature 0-45°C (32-113°F) Operating humidity 20-80 % (no condensation) Supplied accessories Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope *1 In Eco standby mode, LAN-based network functions such as the standby ON function will not operate. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 The HD/SYNC and VD inputs do not accept the tri-level sync signal. *4 With leg at shortest position. *5 Including the supplied lens. *6 Average value. May differ depending on models. Optional accessories Lens Zoom lens ET-DLE150 (1.3-2.0:1) Zoom lens ET-DLE250 (2.4-3.7:1) Zoom lens ET-DLE350 (3.7-5.6:1) Zoom lens ET-DLE450 (5.5-8.9:1) Fixed-focus lens ET-DLE055 (0.8:1) Lamp Replacement lamp unit ET-LAD60 ET-LAD60W (twin pack) Filter Replacement filter unit ET-ACF100 Ceiling mount bracket ET-PKD56H (for high ceilings) ET-PKD55S (for low ceilings) ET-PKD55S ET-PKD56H Multiple terminals 1 LAN Terminal 2 Video Input 3 S-Video Input 4 RGB 1 Input 5 RGB 2 Input 6 DVI-D (HDCP Compatible) Input 7 Remote 1 Input and Output 8 Remote 2 Input 9 Serial Input 10 Serial Output 1 23 4 5 6 Dimensions 7 8 9 10 unit: mm (inch) 440 (17-5/16) 432 (17) 175 (6-7/8) 498 (19-19/32) Projection distance Screen size (4:3) Diagonal image size With ET-DLE150 1.3-2.0:1 min. max. With supplied lens 1.8-2.4:1 min. max. With ET-DLE250 2.4-3.7:1 min. max. With ET-DLE350 3.7-5.6:1 min. max. With ET-DLE450 5.5-8.9:1 min. max. With ET-DLE055 0.8:1 50" 1,344mm 1,967mm 1,785mm 2,376mm 2,361mm 3,777mm 3,713mm 5,681mm 5,525mm 8,912mm 4.5' 6.5' 5.9' 7.8' 7.8' 12.4' 12.2' 18.7' 18.2' 29.3' 808mm 2.7' 80" 2,183mm 3,177mm 2,895mm 3,840mm 3,826mm 6,090mm 6,023mm 9,170mm 9,020mm 14,438mm 1,322mm 7.2' 10.5' 9.5' 12.6' 12.6' 20.0' 19.8' 30.1' 29.6' 47.4' 4.4' 100" 2,742mm 9.0' 3,983mm 3,635mm 13.1' 12.0' 4,816mm 15.9' 4,803mm 7,633mm 15.8' 25.1' 7,562mm 11,496mm 11,351mm 18,123mm 1,664mm 24.9' 37.8' 37.3' 59.5' 5.5' 150" 4,140mm 13.6' 6,000mm 5,485mm 19.7' 18.0' 7,256mm 23.9' 7,244mm 11,489mm 11,411mm 17,312mm 17,177mm 27,333mm 2,519mm 23.8' 37.7' 37.5' 56.8' 56.4' 89.7' 8.3' 200" 5,537mm 18.2' 8,016mm 7,335mm 26.3' 24.1' 9,696mm 31.9' 9,686mm 15,344mm 15,259mm 23,127mm 23,004mm 36,544mm 3,375mm 31.8' 50.4' 50.1' 75.9' 75.5' 119.9' 11.1' 300" 8,333mm 12,049mm 11,035mm 14,576mm 14,568mm 23,056mm 22,956mm 34,758mm 34,656mm 54,966mm 27.4' 39.6' 36.3' 47.9' 47.8' 75.7' 75.4' 114.1' 113.8' 180.4' - - 400" 11,129mm 16,082mm 14,735mm 19,456mm 19,451mm 30,768mm 30,653mm 46,389mm 46,309mm 73,387mm 36.6' 52.8' 48.4' 63.9' 63.9' 101.0' 100.6' 152.2' 152.0' 240.8' - - 500" 13,924mm 20,115mm 18,435mm 24,336mm 24,334mm 38,480mm 38,350mm 58,020mm 57,961mm 91,809mm 45.7' 66.0' 60.5' 79.9' 79.9' 126.3' 125.9' 190.4' 190.2' 301.3' - - 600" 16,720mm 24,148mm 22,135mm 29,216mm 29,217mm 46,192mm 46,047mm 69,651mm 69,614mm 110,231mm 54.9' 79.3' 72.7' 95.9' 95.9' 151.6' 151.1' 228.6' 228.4' 361.7' - - NOTES ON USE 1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. • Never place objects on top of the projector while it is in operation. • Make sure there is an unobstructed space of 500 mm (1.64 feet) or more around the projector's exhaust openings. • Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 ˚C (32 ˚F) and 40 ˚C (104 ˚F). Also make sure the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. * Even when the ambient temperature near the intake opening is 40 ˚C (104 ˚F) or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions. 4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per lamp if using the dual-lamp mode. 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. • The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. • The brightness of the lamp will gradually decrease with use. ® For more information about Panasonic projectors -- http://panasonic.net/avc/projector Please contact Panasonic or your dealer for a demonstration. JQA-1617 EC98J2010 Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export regulations. An application has been filed for trademark rights, or trademark rights have been granted, for PJLink in Japan, United States of America and other countries and area. XGA is trademark of International Business Machines Corporation. All other trademarks are the property of their respective trademark owners. Projection Images simulated. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. (C) 2009 Panasonic Corporation All rights reserved. All information included here is valid as of May 2009. PT-D5KE1 Printed in Japan.