Panasonic PT-DW10000 User Manual - Page 72

Option1 settings (continued) AUX DVI EDID (Only when the optional input module is installed) Select the EDID mode setting that corresponds to the device to be connected. 1. Press Ÿź to select "AUX DVI EDID". OPTION1 COLOR MATCHING LARGE SCREEN CORRECTION AUTO SIGNAL AUTO SETUP BACK COLOR DVI EDID AUX DVI EDID P IN P FUNC1 OSD POSITION OSD MEMORY OFF OFF OFF BLUE EDID2(PC) EDID2(PC) OFF P IN P 2 ON MENU SELECT CHANGE 2. Press ŻŹ to switch "AUX DVI EDID". • The setting will change as follows each time ŻŹ is pressed. EDID1 EDID2 (PC) • EDID1 (Input signal formats supported) : 480p, 576p, 720/60p, 720/59.94p, 720/50p, 1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF, 1 080/23.98sF, 1 080/30p, 1 080/29.97p, 1 080/25p, 1 080/24p, 1 080/23.98p, 1 080/50p, 1 080/59.94p, 1 080/60p • EDID2 (Input signal formats supported) : Displayable resolution: VGA-UXGA (non-interlace) Dot clock frequency: 25 MHz - 162 MHz Note • Interlace signals are not supported even when the EDID2 (PC) mode is selected. P IN P This item is used to set the condition of the Picture-InPicture. 1. Press Ÿź to select "P IN P". OPTION1 COLOR MATCHING LARGE SCREEN CORRECTION AUTO SIGNAL AUTO SETUP BACK COLOR DVI EDID AUX DVI EDID P IN P FUNC1 OSD POSITION OSD MEMORY OFF OFF OFF BLUE EDID2(PC) EDID2(PC) OFF P IN P 2 ON MENU SELECT CHANGE 2. Press ŻŹ to switch "P IN P". • The setting will change as follows each time ŻŹ is pressed. OFF USER1 USER3 USER2 • OFF: P IN P will not be set. • USER1, USER2, USER3: The input signals to be projected in the main window and sub-window can be set. 3. Press ENTER. • The "P IN P:USER1", "P IN P:USER2" or "P IN P:USER3" screen will be displayed. P IN P:USER1 MAIN WINDOW SIZE POSITION SUB WINDOW SIZE POSITION FRAME LOCK TYPE MENU SELECT CHANGE RGB1 VIDEO MAIN WINDOW MAIN WINDOW 72 - ENGLISH