Panasonic PT-DW5100U User Manual - Page 22
Connection - manual
View all Panasonic PT-DW5100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Connection Setup precautions • Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again. • All cable connections should be made with the entire system devices, including the projector, first turned off. • Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables. • Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector's video line will relieve this problem. • The projector only accepts composite-video, S-Video, analog-RGB (with TTL sync. level) and digital signal. • Some PC models are not compatible with PT-D5700U/PT-D5700UL/PT-DW5100U/PT-DW5100UL projectors. • When using long cables to connect various equipment to the projector, there is a possibility that the image will not be output correctly unless a compensator is used. • The pin assignments on the S-VIDEO IN terminal are as follows: Pin No. Signal Ground (luminance) Ground (color) Luminance signal Viewed from mating side Color signal • The pin assignments on the RGB2 input terminal are as follows: Viewed from mating side Pin No. Signal R/PR G/G · SYNC/Y B/PB HD/SYNC VD Pin : Not used. Pins - , and : Ground • The pin assignments on the DVI-D input terminal are as follows (interface with DVI-D output terminal on PC): Viewed from mating side Pin No. Signal T. M. D. S data 2- T. M. D. S data 2+ T. M. D. S data 2 shield DDC clock DDC data Pin No. Signal +5 V Ground Hot plug sense T. M. D. S data 0- T. M. D. S data 0+ T. M. D. S data 0 shield T. M. D. S data 1- T. M. D. S data 1+ T. M. D. S data 1 shield T. M. D. S clock shield T. M. D. S clock+ T. M. D. S clock- • The DVI-D input terminal supports single link only. • EDID settings may be needed depending on the DVI equipment being connected. (page 37) • The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment. • This projector supports HDCP. 22