Panasonic PT-LB10NTU Portable Projector - Page 19

Correcting keystone distortion Keystone distortion is corrected automatically when the projector's automatic setup function is used, but this correction will not apply if the screen itself is tilted. In such cases, you can correct the keystone distortion manually with the following procedure. Vertical keystone distortion correction only. KEYSTONE 0 Vertical keystone distortion correction Operation Press the H button. Press the I button. NOTE: B If you press the AUTO SETUP button after correcting the keystone distortion manually, the automatic keystone correction function will operate and the corrected picture will return to its previous incorrect condition. To prevent this from happening, you can set "AUTO KEYSTN" in the "OPTION1" menu to "OFF". (Refer to page 44.) B Vertical keystone distortion can be corrected to ±30° of the angle of tilt. However, the greater the correction amount, the more the picture quality will deteriorate, and the harder it will become to achieve a good level of focus. To obtain the best picture quality, set up the projector and screen in such a way that the amount of keystone correction required is as minimal as possible. B The picture size will also change when correction of keystone distortion is carried out. 36-ENGLISH Adjusting the picture Press the F or G button on the projector or remote control unit to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment. When an RGB signal is being input or NETWORK is selected PICTURE PICTURE MODE DYNAMIC CONTRAST 32 BRIGHT 32 SHARPNESS 0 COLOR TEMP. STANDARD W-BAL R 32 W-BAL G 32 W-BAL B 32 AI ON SIGNAL MODE XGA STANDARD SELECT ADJ RETRN When NETWORK is selected, "WBAL R/G/B" settings will not be displayed. (PT-LB10NTU only) When an YPBPR signal is being input PICTURE PICTURE MODE STANDARD CONTRAST 32 BRIGHT 32 COLOR 32 TINT 32 SHARPNESS 6 COLOR TEMP. STANDARD AI ON SIGNAL MODE 480p STANDARD SELECT ADJ RETRN When an S-VIDEO/VIDEO signal is being input PICTURE PICTURE MODE STANDARD CONTRAST 32 BRIGHT 32 COLOR 32 TINT 32 SHARPNESS 8 COLOR TEMP. STANDARD AI ON TV-SYSTEM AUTO STILL MODE OFF STANDARD SELECT ADJ RETRN PICTURE MODE PICTURE MODE NATURAL [ STANDARD [ DYNAMIC [ BLACK-BD Select the picture mode that best matches the image source and room conditions. The mode best used in dark rooms is "NATURAL". For rooms having regular lighting conditions in use, select "STANDARD". For exceptionally bright rooms, use "DYNAMIC". "BLACK-BD" is for the PTLB10NTU/PT-LB10U/PT-LB10SU/ PT-LB10SVU only. This item is available only when "BLACKBOARD" in the "OPTION1" menu is set to "ON". Select "BLACK-BD" when projecting onto blackboards. ENGLISH-37 Adjustments and settings