Panasonic PT61LCZ7 Lifi Hdtv - Page 55
About, Reset, Select Yes, and press OK.
View all Panasonic PT61LCZ7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
To conserve energy, this Projection Display automatically turns off when NO SIGNAL continues more than 10 minutes. Notes No signal shut-off • Not in use when setting "PC", "Photo viewer mode", "Lock", or Digital channel. • "No signal shut-off was activated" will be displayed for about 10 seconds when this Projection Display is turned on for the first time after turning the power off by "No signal shut-off". • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. To conserve energy, this Projection Display automatically turns off when no operation of remote or front panel key continues more than 3 hours. Notes No action • Not in use when setting "PC". shut-off • "No action shut-off was activated" will be displayed for about 10 seconds when this Projection Display is turned on for the first time after turning the power off by "No action shut off". • The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shut-off. About Display the TV set Version and Software License. Procedure 1. Press ▲▼ to select "About". 2. Press OK to display the About screen. Setup 2/2 Other adjust About Reset 3. Press ▲▼ to select "Version" or "License". 4. Press OK to display the Version or License screen. About Version License Reset Setup is reset. Procedure 1. Press ▲▼ to select "Reset". 2. Press OK to display the password screen. Setup 2/2 Other adjust About Reset 3. Enter your password by pressing the NUMBER keys to reset the Setup settings. Password Enter password. ---- 0 - 9 4. The confirmation screen is displayed. Select "Yes", and press OK. Reset Reset all settings to default. Yes No Reset Reset in progress. Please refrain from any activity. Do not turn off or unplug the TV. Notes • Performing Reset will clear all items set with Setup, such as channel settings. Use Reset with care. • POWER indicator flashes red. After flashing stops, unplug the unit then plug it back in and turn power ON. • When using "EZ Sync™ "HDAVI Control™"", with the device connected, set "EZ Sync" first to "Off" and then "On" using the Setup Menu. (p. 52-53) Advanced Operation 55