Panasonic PTD5500UL PTD5500U User Guide - Page 54
Specifications - pt d5500ul lamp
View all Panasonic PTD5500UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Specifications Model No. Power supply Power consumption DLPTM panel Panel size Display system Number of pixels Lens Powered zoom Powered focus control Projection lamp Optical output Applicable scanning frequency For video signal (S-video included) For RGB signal For DVI-D signal For YPBPR signal Color system Screen size Screen aspect ratio Projection scheme Contrast ratio Interface ports RGB1 input terminal PT-D5500U PT-D5500UL AC 120 V, 50 Hz/60 Hz 770 W (about 10 W in standby without fan running) 0.7 inch (aspect ratio 4:3) DMDTM element, DLP type 786 432 pixels (1 024 x 768 dots) 1 to 1.36 F=1.7 to 2.0 f=25.6 to 33.8 2 bulbs x 300 W UHM lamp 5 000 lm 1 Option Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz Horizontally 15 kHz-91 kHz, vertically 50 kHz-85 kHz, Panasonic Intelligent Auto Scanning (PIAS) system Dot clock frequency Less than 108 MHz VGA-SXGA Dot clock frequency 108 MHz or less [480i], horizontally 15.73 kHz, vertically 59.94 Hz [480p], horizontally 31.5 kHz, vertically 59.94 Hz [576i], horizontally 15.63 kHz, vertically 50 Hz [576p], horizontally 31.25 kHz, vertically 50 Hz [720/60p], horizontally 45 kHz, vertically 60 Hz [1035/60i], horizontally 33.75 kHz, vertically 60 Hz [1080/60i], horizontally 33.75 kHz, vertically 60 Hz [1080/50i], horizontally 28.13 kHz, vertically 50 Hz • HD/SYNC, VD terminals are not compliant with 3 value composite SYNC. 7 standards (NTSC/NTSC4.43/PAL/PAN-N/PAL-M/SECAM/PAL60) 50 inch-600 inch 4:3 Menu-selectable from front/rear/ceiling mount, and floor standing 1 600:1 (when "HIGH" is selected as the "CONTRAST MODE" setting) 1 set, BNC x 5 [For YPBPR input] Y: 1.0 V[p-p] synchronization signal included, PBPR: 0.7 V[p-p] 75 Ω For G-SYNC: 1.0 V[p-p] 75 Ω HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted VD: TTL, high-impedance, positive/negative polarity automatically adjusted • However, HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC. 1 These values are for the lens provided with the PT-D5500U. Note that these values change according to the lens used. 54