Panasonic PTLB50U Lcd Projector-english/french - Page 58
Remedy, Problem, Indicator, display, Possible, cause, LAMP indicator, Service Center
UPC - 791871111314
View all Panasonic PTLB50U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
LAMP indicator Indicator display Illuminated (red) It is nearly time to Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector is turned on? B The power may have been turned on straight away after it was turned off. B There may be an abnormality in the lamp circuit. B The lamp unit may be blown. B This occurs when B Wait for a while B Disconnect the the operation time until the lamp unit power cord by for the lamp unit is cools down before following the nearing 1 800 turning the power procedure on hours (when back on again. page 28, and then "LAMP POWER" contact an has been set to Authorized Remedy "STANDARD" and when "AI" has Service Center. B Ask your dealer or been set to an Authorized "OFF"). Ask your Service Center to dealer or an replace the lamp Authorized unit. (page 60) Service Center to replace the lamp unit. (page 60) NOTE: B Be sure to disconnect the power cord by following the procedure given in "Turning off the power" on page 28 before carrying out any of the procedures in the "Remedy" column. B If the TEMP indicator is illuminated and the power turns off after the procedures in the "Remedy" column have been carried out, it means an abnormality has occurred. Please contact an Authorized Service Center so that the necessary repairs can be made. 58-ENGLISH