Panasonic PV GS15 Digital Video Camera - Page 63
Menus Related To Taking Pictures, Menus Related To Playback, H.shoe Mic], Date/time], Audio Rec]
UPC - 037988977734
View all Panasonic PV GS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Menu Menus related to taking pictures Menus related to playback ª [H.SHOE MIC] Set to [LOWCUT] and this reduces low sound noise and wind noise hitting the stereo zoom microphone (VW-VMH3; optional) mounted on the smart accessory shoe. ª [DATE/TIME] This switches between date and time indications. ≥The Camcorder automatically records the date and time the picture was taken on the tape. ≥You can also show or change the date/time indication by repeatedly pressing the [DATE/ TIME] button on the remote control. ª [AUDIO REC] Switches the audio (PCM audio) recording systems. [12bit]: Records audio in "12 bit 32 kHz 4 tracks". (The original audio signals can be kept after the other audio signals are dubbed.) [16bit]: Records audio in "16 bit 48 kHz 2 tracks". Audio can be recorded in higher quality. (If audio signals are dubbed, then the original audio signals will be erased.) ª [REC LAMP] Set to [ON] and this turns the recording lamp on during recording, which indicates that recording is underway. Set to [OFF] and this does not turn on the lamp even when recording is underway. ª [DISPLAY] Set to [ON] and the display mode can be switched to all functions. Set to [OFF] and it can be switched to minimum display. ª [BEEP SOUND] Set to [ON] and confirmation/alarm beeps are issued as follows. 1 Beep ≥When you start recording ≥When you turn on the power 2 Beeps ≥When you pause recording 2 Beeps for 4 times ≥When a cassette with its erasure prevention tab set to [SAVE] is inserted, condensation occurs, and at other times. Check the sentence displayed on the screen. ª [AV JACK] This switches among the output settings of the AV/headphone terminal. [OUT/Ë]: Automatically switches between AV and headphone output. [OUT]: Use this setting when image or sound is not output normally to the TV in [OUT/Ë]. ≥When using the headphone, set to [SETUP] or [BASIC] >> [AV JACK] >> [OUT/Ë]. If set to [OUT], you may hear noises on the right. ª [REC DATA] Set to [ON] and the settings (shutter speed, iris/ gain values, and white balance settings (-39-), etc.) used during the recordings are displayed during playback. ≥When the [AUTO/MANUAL/FOCUS] switch is set to [AUTO], the indication [AUTO] will appear. ≥When there is no data, [---] appears on the display. ≥If the Camcorder data of the Camcorder are played back on other equipment, the settings information is sometimes not displayed normally. ª [AUDIO OUT] This switches the sound to be played back. [STEREO]: Stereo sound (main sound and sub sound) [L]: Left channel sound (main sound) [R]: Right channel sound (sub sound) 63 LSQT0861