Panasonic PV27DF64 PV20DF64 User Guide - Page 18

Initial Setup -Ready to Play- EJECT POWER • Function buttons are void during Initial Setup. • If Auto Clock Set takes more than 30 minutes, press STOP and perform settings manually. (See pages 19-21.) ACTION SELECT STOP SET Case 1 10/25/2004 MON 11:45AM Settings are made automatically. When complete, this screen DST:ON SETTING : CH 10 AUTO CLOCK SET appears. COMPLETED POWER STOP Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. Plug the unit power cord into an AC wall outlet. Case 2 If setup is incomplete, the following screen appears. Check connection of Antenna/Cable to the RF in Terminal, then try manually to set the clock as follows. AUTO CLOCK SET IS INCOMPLETE PLEASE SET CLOCK BY PRESSING ACTION KEY a. Press ACTION on the Remote to display SET CLOCK Menu screen. SET CLOCK 1/ 1/2004 THU 12:00AM DST:ON Press POWER on the remote or unit. Auto channel and clock set starts. • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off. CH AUTO SET PROCEEDING AUTO CLOCK SET PROCEEDING SELECT: SET:SET START :ACTION b. Press ▲▼ to select the month and press SET to set. In the same manner, select and set the date, year, time, and DST (Daylight Saving Time). • Press ◄ repeatedly to move the cursor. Press ▲▼ to make a correction. SET CLOCK 10/25/2004 MON 11:45AM DST:ON CANCEL:STOP SELECT: SET:SET START :ACTION c. Press ACTION twice to start CLOCK and exit. 18 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo