Panasonic PVC2023A PVC2023A User Guide - Page 8
Connections / Initial Setup (ready To Play
View all Panasonic PVC2023A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connections/ Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. CHoonwnteocCtinognnect For ANT./Cable Connect the cable from Antenn Cable to the VHF/UHF terminal on the unit. IN from ANT./CABLE VHF/UHF VHF/UHF For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. UNIT VHF/UHF Cable TV Converter Box WARNING: Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only. Initial Setup (Ready to Play) 1 Plug the unit power cord into an AC wall outlet. 2 Press POWER on the remote or unit. The unit comes on and auto channel and clock set starts. CH AUTO SET PROCEEDING VHF/UHF VHF/UHF IN from ANT./CABLE 3 Settings are made automatically. When setup is done, this screen appears. 2/ 6/2002 WED 12:00PM DST : ON SETT ING : CH 10 AUTO CLOCK SET COMPLETED • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS reciever, it must be turned off. If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page. AUTO CLOCK SET PROCEEDING CANCEL : PRESS STOP KEY AUTO CLOCK SET I S I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY 8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]