Panasonic PVC2063A PVC2063A User Guide - Page 8

Connections/ Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. HCoownntoecCtoinngnect For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit. For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. VHF/UHF UNIT IN from ANT./CABLE VHF/UHF VHF/UHF Cable TV Converter Box WARNING: Overtightening "Nut type" RF coaxial cables may damage jacks. Finger tighten only. Initial Setup (Ready to Play) Press Combo on the remote for Combo mode. 1 Plug the unit power cord into an AC wall outlet. 2 Press POWER* on the remote or unit. The unit comes on and auto channel and clock set starts. VHF/UHF VHF/UHF IN from ANT./CABLE 3 Settings are made automatically. When setup is done, this screen appears. 2/ 6/2002 WED 12:00PM DST : ON SETT ING : CH 10 AUTO CLOCK SET COMPLETED CH AUTO SET PROCEEDING • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS reciever, it must be turned off. If AUTO CLOCK SET IS INCOMPLETE screen appears, set the clock using MANUAL CLOCK SET procedure on next page. AUTO CLOCK SET PROCEEDING CANCEL : PRESS STOP KEY AUTO CLOCK SET I S I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY 8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]