Panasonic PVD4754S PVD4754S User Guide - Page 16
Initial Setup For Basic Connections (ready To Play
View all Panasonic PVD4754S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Initial Setup for Basic Connections (Ready to Play) Before doing Initial Setup 1 Turn TV on. 2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK ➛ TV] • Go to "Initial Setup (Ready to Play)." (See below.) [Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone. • If you use a DSS Receiver, it must be turned off. Initial Setup (Ready to Play) 1 Press VCR on remote for VCR mode. 2 Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts. • If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4. • To change VCR's output channel, please see "VCR's Output Channel" on page 19. Plug VCR Power plug into an AC wall outlet. CH AUTO SET PROCEEDING CANCEL : STOP AUTO CLOCK SET PROCEEDING Notes • Function buttons are void during Initial Setup. • To eject a tape during Auto Set, press EJECT on remote or STOP/EJECT twice on DECK. Then make settings manually. (See p. 18.) • If Auto Clock Set takes more than 30 minutes, press STOP and perform settings manually. (See p. 18.) CANCEL : STOP Continued on next page... 16 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo