Panasonic PVD4761 PVD4761 User Guide - Page 17

Initial Setup (Connection) *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. 5 SELECT CONNECTION CABLE / DSS BOX VCR TV Press to select the same channel as the Cable CABLE / DSS BOX OUTPUT CH CH 01 SELECT : SET : SET EXIT : ACT I ON Box or DSS Receiver output channel. Press SET to enter. 6 CHANNEL / CLOCK AUTO SET CONNECT ANTENNA CABLE AND I F YOU USE A CABLE BOX, TUNE I T TO YOUR LOCAL PBS CH THEN. . . PLE ASE PRESS CH UP KEY Press CH to start "CHANNEL/CLOCK AUTO SET." 7 Settings are performed automatically. Case 1 Setup complete... Case 2 Setup Incomplete... 1/ 4/ 2001 THU 12:00PM DST : ON SETT I NG : CH 02 AUTO CLOCK SET COMPLETED END : CH UP KEY Press CH to exit. AUTO CLOCK SET IS I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY Press ACTION to display Manual Clock Set screen. Reset All Memory Functions Use when moving DECK to new location, or if a mistake was made in the Initial Setup section. • Make sure a tape is not inserted in DECK. 1 Turn DECK Power on. 2 Press and hold both PLAY and CHANNEL on DECK for more than 5 seconds. • The power shuts off. • Please ignore "NO CASSETTE" warning. 3 Do "Initial Setup" on p. 16. SET CLOCK 1/ / : D--S-T-: O-N-- SSEELE CT MONTTHH SELECT : SET :SET EXIT : ACT I ON SET CLOCK 1/ 4/2001 THU 12:00PM D--S-T-: O--N- SET COMPLETED SET : SET BACK : START : ACT I ON Press to select the month and press SET. In the same manner, select and set the date, year, time, and DST (daylight saving time). Press ACTION twice to start CLOCK and exit. 17