Panasonic PVDF203 PVDF203 User Guide - Page 19

Copy Your Tapes (Dubbing) *Important: If a remote control button does not work when pressed, press the TV/VCR button on the remote and try the button again. Connections you'll need to make Recording (Editing) unit Front Back Playing (Source) VCR Basic Operation R-AUDIO OUT-L VIDEO OUT S-VIDEO OUT VIDEO IN2 L-AUDIO IN2-R S-VIDEO IN2 R-AUDIO IN1-L VIDEO IN1 S-VIDEO IN1 If cables are connected to both connectors (S-VIDEO IN or VIDEO IN), the S-VIDEO signal will be selected automatically. (The S-VIDEO signal has priority.) If you would like to display the VIDEO signals being input to the VIDEO IN connector, do not connect any cables to the S-VIDEO IN connector. Playback (Source) 1 Insert pre-recorded tape. Recording (Editing) unit Insert blank tape with record tab. • Dubbing tapes protected with Copy Guard will have poor quality results. 2 Select "LINE" mode. See "Selecting Input Mode" below. 3 Press PLAY then press PAUSE at starting point to put in Standby mode. Press REC, then press STILL/PAUSE immediately to put in Standby mode. (Perform operation of steps 4 and 5 on both units at same time.) 4 Press PLAY to start dubbing. Press STILL/PAUSE to start dubbing. 5 Press STOP to stop dubbing. Press STOP to stop dubbing. Selecting Input Mode Method 1: Press INPUT repeatedly. Channel Number LINE1 LINE2 Method 2: Press CH . The display will change as follows. Caution LINE2 LINE1 123 (CABLE) (TV) 125 or 69 Method 3: a Press ACTION for MAIN MENU. b Press to select "TV," then press ACTION for SET UP TV screen. c Press to select "INPUT SELECT," and then press to select "TUNER" or "LINE." d Press ACTION twice to exit this mode. • Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. • Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/Video CD/CD to VHS tape using this unit. 19