Panasonic PVDF204 PVDF204 User Guide - Page 68

Before Requesting Service Check the following points once again if you are having trouble with your unit. Power PROBLEM No power... Power turns itself off... CORRECTION Page Completely insert Power Plug into an AC outlet. 13 Set POWER button to ON. 11-12 Auto power-off (shut off) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV or 45-46 Playback mode. Turn the power back on. Monitor Make sure your antenna system (TV or CABLE) is correctly set. 14 No picture or sound... Completely insert Power Plug into an AC outlet. 13 Set POWER button to ON. 11-12 Poor picture with normal sound... Adjust BRIGHTNESS, SHARPNESS, and PICTURE controls in the SET UP Video Adjustment. 28-29 Poor sound with normal picture... Adjust VOLUME control. 22 Poor TV reception... Adjust SHARPNESS and PICTURE controls in the SET UP Video Adjustment. 28-29 No color or poor color... Adjust TINT and COLOR controls in the SET UP Video Adjustment. 28-29 Ghost (multiple) images... Install a directional antenna. 14 TV programs cannot be watched... Make sure the selected channel is in unit's memory. 19 Channel cannot be selected... Only the channel being recorded can be viewed on this unit. 31 VCR TV program cannot be recorded... Timer recording cannot be performed... No playback picture, or the playback picture is noisy or contains streaks... VCR cannot be controlled... Make sure your antenna system (TV or CABLE), is correctly set. Make sure cassette record tab is intact. Check that clock is set to current time and date. Make sure DSS/CABLE box (if used) is left on and tuned to channel to be recorded. Set recording Start/Stop times correctly. Timer recording may not be performed or continued if a power interruption of more than 1 minute occurs before or during a Timer Recording, even after power is restored. Adjust TRACKING control in either direction. Try Head Cleaning. Make sure VCR LOCK is set to off. 14 8 45 14 34-35 37 8 37 Remote Control Unit cannot be controlled... ACTION, PLAY, SELECT, SET POWER, etc. buttons cannot be selected... Aim Remote directly at the remote sensor on the unit. Avoid any object blocking signal path. 12 Inspect the remote batteries. 8 Make sure VCR LOCK is set to off. 37 Exposing unit remote sensor to direct fluorescent or outdoor light may cause signal interference. 12 Press TV/VCR for TV-VCR mode. 12 Press DVD for DVD mode. 12 Check remote batteries. 8 68 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo